New Features - Tally.ERP 9 Series A Release 1.0

green_left.gifgreen_right.gif

Some of the new features in Tally.ERP 9 include,

Remote Access

Tally.ERP 9 provides remote capabilities to its users to access data from anywhere. Using Tally.NET features, the user can create remote users (ids), authorize & authenticate them to access company remotely. Currently, the remote connectivity allows the user to view/display the required information on his system instantly.

The process for remote access is as follows:

 Remote_User_and_Auditor.gif

 

Requirements for Remote Connectivity:

At the Customer’s Location:

Note: For the company to be accessed by the Remote User the computer has to be kept on and Tally.ERP 9 with company loaded.

At the Remote Location:

Benefits of Remote Access:

Data Security:

Remote TDL’s

During Remote Access, the additional TDL’s running at the customer’s place will also be available to the Remote User at the remote Location.

The user experience remains the same either working locally on Customer’s Computer or from a Remote Location. It is recommended to use Broadband connections to enjoy the best Remote experience.

Tally.NET

Tally.NET is an enabling environment which works behind the scenes to facilitate various Internet based services in Tally.ERP 9. Each Tally.ERP 9 is enabled for Tally.NET Services by default. Tally.NET provides the following services/capabilities in this release of Tally.ERP 9:

Tally.NET Features

The following services will be available in the forthcoming releases:

Simplified Installation Process

Tally.ERP 9 comes with a new enhanced installer, which allows the user to configure different settings from a single screen, as per requirements.

New Tally.ERP 9 Installer

The new installer allows the user to install Tally.ERP 9 application as well as License Server, however you may choose to install either of them one after the other.

Using the new Installer, the user can install Tally.ERP 9 and License Server separately on different Computers/folders or same folder.

 Figure_1_Tally.ERP_9_installer.gif

Uninstaller:

The Uninstaller wizard similar to the Installer, also provides flexibility to uninstall either Tally.ERP 9 application or License Server separately or both together. If only License Server is uninstalled, then Tally.ERP 9 will switch to Education mode on the Client Computer.

Tally Admin Tool

The TallyAdmin tool is a new component that has been introduced with Tally.ERP 9 which enables the user to perform the following activities without starting Tally.ERP 9

The Tally Admin Tool is available in the Tally.ERP 9 application folder, on installation.

Introduction to TDL Server DLL Component

Tally.ERP 9 onwards, a new component TDLServer.DLL has been introduced, which gets copied to the folder in which Tally.ERP 9 has been installed. All the default TDL files of Tally have been integrated in this component. On invoking Tally.ERP 9, these TDL’s will be loaded. The user TDL’s will be subsequently loaded as usual from Tally.ini.

The componentization will result in a more robust application. The benefits of this componentization are as follows-

Unified File Format for Tally.ERP 9

The Tally.ERP 9 application folder contains files other than the data files. These are referred to as secondary files. From this release onwards the file format of all the secondary files have been standardized.

TCP Files

All the TDL files which were compiled for previous versions of Tally as .tcp have to be converted to a new format. Mentioned below are the ways in which this can be done.

Note: The TDL files in txt format does not require this conversion.

Conversion of Tally 7.2 tcp files to Tally.ERP 9 Format

Tally7.2 tcp files can be migrated to Tally.ERP 9 format using the Tally72Migration tool available in the Tally.ERP 9 folder. Migration process is the same as earlier.

Conversion of Tally 9 tcp files to Tally.ERP 9 Format

It is mandatory to specify the File Type. The file Type can be TSF or TCP.

In the Source File box specify the name of file to be converted.

In Destination File box provide the name for the converted file.

Note: Start Tally.ERP 9 and check the status of your TDL file.   [Go to Gateway of Tally, click F12:Configuration > Functions and Features] If the status is Active, then the tdl is compatible to Tally.ERP 9 format. If the status is Error, then scroll down to the line and press enter to know the details. Then make the TDL syntactically compatible as per the Tally.ERP 9 standards.

Configuration File

Manually the file “Tallysav.tsf” can be converted to the new standardized format by selecting “TSF” as the file type in the Conversion tab of Tally Admin Tool. Ensure that the destination file name is “Tallycfg.tsf

Licensing in Tally.ERP 9

Tally.ERP 9 launches a new Licensing mechanism which is simple, user-friendly and addresses all the licensing activities from a single screen for users across segments of business. Besides, allowing activation of Single User (Silver) and Multi User (Gold) license, it also extends the feature to Multi-Site Licensing.

The salient features of Licensing are:

Site Licensing

A new concept of Site Licensing is introduced from Tally.ERP 9. A site refers to activation of Tally.ERP 9 Single or Multi User license. The site licensing is broadly classified into two categories namely Single Site and Multi-Site.

Advantages:

Licensing Mechanism

Control Centre

Control Centre is a new feature being introduced with Tally.ERP 9. This utilises Tally.NET as an interface between the end user and Tally.ERP 9 installed at different locations. With the help of Control Centre, you will able to:

Following are brief descriptions of the features of the Control Center:

Create users with predefined Security levels

Using the Control Centre feature, the Account Administrator can create users and map them to a predefined security level and authorise them to access a Site/Location linked to that Account. Further, the system administrator can also create Remote users (Tally.NET Users & Tally.NET Auditors) and allow / disallow them to remotely access the data.

The predefined security levels in Tally.ERP 9 are:

Centrally Configure and manage your Tally.ERP 9

The Control Centre provides the flexibility to create (or change) the master configurations set for an Account and apply them to one or more sites (all sites) belonging to that Account.

The following master configurations set can be made from the Control Centre:

The master configurations set created, is applied initially to the Account centrally, which is then inherited by the site(s) on updation of license, based on the site level permissions defined by the Account Administrator.

Surrender, Confirm or Reject activation of a Site

The Account Administrator is authorised to surrender, confirm a site license or Reject the request received on activation from another site.

Maintain Account related information

Allows you to maintain information about the organisation. Based on the requirements, the Account Administrator can merge multiple accounts into one or split an account into multiple accounts for easy and better management.

Support Centre

Tally.ERP 9 provides a new capability known as Support Centre, wherein a user can directly post his support queries on the functional and technical aspects of the Product. Using Support Centre feature, the user can view all the support queries reported via Support Centre and also through other modes viz., Email, Calls, etc.

The Support Centre feature facilitates viewing queries for an activated license along with the Status i.e., Closed / Pending and Ticket Summary. The report is viewed based on Date, Status and Location.

support_centre_image.gif

Faster reach for help and support

The Support Centre makes it easy and convenient to reach out Tally Support, including the Tally Service Partner, for any product help and support, by a click of a button from within the product.

Access solutions to your problems any time

This feature facilitates instant reference to the solutions provided for your queries at any point of time.

Avoid repeated explanations

Availability of information on the issues, interactions and resolutions, to the entire Tally Support Team, including the Tally Service Partners largely reduces the possibilities of repeated explanations on the issues/support queries and thereby ensures quality help and support.

Track your issues on real-time basis

Support Centre enables you to track the status of your queries including the full chain of interactions irrespective of the mode of communication. If you have posted a query from the Support Centre within Tally.ERP 9 and then interacted over the phone, you will be able to see both the interactions.

Access issues of any Location/Site

In case of Multi-site License, you can view the details of issues of any location /site from any of your Location(s).

Reach out to your nearest Partner instantly

You can search for a service partner and post your queries instantly.

Access your Support Centre remotely from any Tally.ERP 9

As an authorized Tally.NET user, Support Centre feature can be accessed remotely from any Tally.ERP 9 (active or in Educational mode) from anywhere. Support Centre also allows you to Select the required account from the list of User Accounts in case your ID (user name) is linked to multiple accounts.

Configure Tally.ERP 9 from Tally.ERP 9

The user can make all the necessary changes to the product configuration from Tally.ERP 9 itself by going to Data Configuration, TDL Configuration, Advanced Configuration and Licensing options available under F12:Configurations from Gateway of Tally. This provides a flexible option for the user to make changes in the Tally.ini file (Configuration file) and apply them from the application itself.

New Look & Feel

Resizing Screens

The user can resize the Tally.ERP 9 screen/window. The resize parameters such as height and width are defined in the Tally.ini file. The user can compare identical reports of different companies by changing the screen size for the two instances of Tally.ERP 9.

Multiple Selection capabilities

The user can now select multiple lines in a Report at single instance. On selecting multiple lines, the user can delete or hide line(s) based on the requirement of the report.

Multiple_selection_capability.gif

Bottom Button Toolbar

Another new component that has been introduced in a set of buttons located at the bottom part of every report and Data Entry screen. Click on the button or press the relevant keys to perform the required task.

Information panel

A new component titled Information Panel or Info Panel has been introduced which is located in the bottom part of the Tally.ERP 9 screen. The Info Panel has five blocks namely Product, Version, Edition, Configuration and Calculator. The user can click on any one of these blocks to view the detailed information.

Product

Displays the logo and product name. The user can click on this section to go to Tally Solutions website to view the latest happenings.

Version

This part of the Info Panel displays the Release, Build, Date on which the recent License Update is done. In case Tally.ERP 9 is not updated with the recent Release/Build, the info panel will take you to the Download Center get the latest update. The user can also click on as on Date to update the License. It also displays the information on the Type of License (Silver/Gold/Auditors’ Edition).

License

Displays the Serial Number, Site ID, Account ID and Tally.NET subscription details.

Configuration

Displays the Stat and Client Server Information. Stat Information will take the user to the Download center to download the Latest Stat file. The Client Server Information will allow the user to re-configure the settings. The Additional TDL’s loaded will also be shown in this section.

During Voucher Entry or while viewing reports the information panel is hidden to provide additional working space. However, you can click on the directional arrows to restore the information panel as and when required.

Calculator

Displays the Connection status while connecting to Tally.NET, during Data Sync, and Remote connectivity. This can also be used as Calculator.

Enhanced Payroll Compliance

Payroll in Tally.ERP 9 is now simplified & enhanced to handle all the functional, accounting and statutory requirements of your business. The following Statutory features and processes have been incorporated for faster, better and accurate payroll processing.

Payroll Statutory Features

The following statutory features have been incorporated in Tally.ERP 9:

Employees Provident Fund (EPF)

Employees State Insurance (ESI)

Professional Tax (PT)

Payroll Processes

The following pre-defined payroll processes have been provided to automate different functions in Payroll:

Excise for Manufacturers

Tally.ERP 9 provides a complete solution for Excise related Business requirements for versatile industries. Salient features of Excise in Tally.ERP 9 are:

Excise Manufacturing Reports in Tally.ERP 9

Auditors’ Edition of Tally.ERP 9

Tally.ERP 9 offers a special Gold Auditors’ Edition, which provides Audit and Compliance capabilities exclusively for Chartered Accountants. The current release provides the following tools:

Using Tally.ERP 9, Chartered Accountants can provide Audit and Compliance services to their clients in the following scenarios:

Audit at CA’s office by accessing local data

The Auditors’ Edition includes the Audit/Compliance capabilities as a default feature without any dependency on Tally.NET for Authentication. When the Client’s data is locally available at CA’s office, the Auditor can perform the Audit or Verification as the Tax Audit and Statutory Compliance features are available by default.

Audit at Client’s place by accessing local data

When the Auditor wants to use the Auditors’ License from Clients Office to provide the Audit or Compliance Service, the Internet Connection and Tally.NET subscription is required. The Client should have authorized the Chartered Accountant as Tally.NET Auditor for the Company. In this scenario, Tally.NET is used to Authenticate the Auditor and fetch the Auditors’ License on the Client’s Tally.ERP 9. The Auditor can then open the Company and perform Audit or Verification in the same way as it is done in the Auditor’s office with Local data using the Auditor’s License.

In this scenario, the Auditor should have a valid Tally.NET subscription to perform Audit.

Audit Remotely by accessing Client’s data from anywhere

When the Auditor wants to access the Client’s Data Remotely and provide Audit and Compliance services from his office (or from any other remote location), the internet connection and valid Tally.NET subscription is a must for both Auditor and Client. The Client should have authorized the Chartered Accountant as Tally.NET Auditor and Connect the Company to Tally.NET at the time of Audit/Verification process. The Auditor will Login as Remote User and provide the Auditor’s Username and Password to view the Companies that are available for Audit (Connected) belonging to various Client’s based on the Access provided. The Auditor can open the required Company to perform the Audit/Verification and save the Audit/Verification Notes.

The user experience essentially remains the same in all the three scenarios.

 Remote_User_Services-Auditor.gif

Tax Audit

The Tax Audit feature in Tally.ERP 9 enables the auditor to compile information in comparatively less time with required accuracy to form his opinion and print Annexure as required for Tax Audit under Section 44AB. The following Clauses are available with respect to Form 3CD:

Statutory Compliance

Statutory Compliance is a comprehensive tool available with Auditors’ Edition to provide Compliance services for the following Direct and Indirect Tax modules available in Tally.ERP 9.

The salient features for Statutory and Compliances are:

Major Enhancements

Some of the major functionality changes in Tally.ERP 9 include,

Tax Deducted at Source (TDS)

The TDS feature in Tally.ERP 9 has been revamped to handle all the functional, accounting and statutory requirements of your business in an accurate and simplified manner. The new/enhanced TDS features are:

TDS related Reports in Tally.ERP 9:

 

This can be filtered based on:

Data Synchronization Changes

Using Direct – Client and Server Capability

Direct- Client and Server capability for Synchronization through a private network will be incorporated as a default feature of Tally.ERP 9 Series A release 1.0 onwards.

Using Tally.NET Server

The process of Data Synchronization using TallyLink Server has been changed in Tally.ERP 9. Going forward Synchronization will be available as a service through the Tally.NET Framework. The user will be able to use Tally.ERP 9 Silver (SU) at both the ends to Synchronize data.

To use this service the Tally Server Company has to be Connected to Tally.NET server at the time of Synchronization.

Note:Tally.NET Server (TNS) will be used for Synchronization instead of TRB Server.

In Sync Configuration, under TallyLink Configuration, the options "Use Tally Link” & "Connect to Tally Link Server" have been removed.

Size and Performance changes

Automatic caching based on system memory

Report generation involving large amount of data was always impeded by the problem of high memory usage. In Tally.ERP 9, a new feature has been introduced to overcome this hurdle. The application now uses an automatic caching based on the memory of the system it is running on. This results in the usage of lesser memory even with higher data volumes.

Reports which were running out of memory or consuming a large amount of virtual memory on a 2GB system, will now respond even on a 1GB system. This can be observed by generating a report, say a day book containing 50,000 to 100,000 vouchers on a 512MB machine using the last major release as well as this release.

Faster Data Entry

The data entry speed has been considerably increased in scenarios where there are a large number of ‘Tracking numbers’ and ‘list of pending orders’. In other words, the time taken to make a single entry has been reduced due to the faster retrieval and display of tables for selection of tracking numbers and pending orders.

Application size reduction by three-fourth

A faster, powerful and a SMALLER Tally.ERP 9 application! The application has been redesigned to drastically reduce its size. The “exe” file of the application has been reduced to approximately three-fourth the size of earlier versions. To be more precise, it has been reduced from 10.7 MB to 1.96 MB. This will result in faster installation, loading, and opening of the application, thereby enhancing the overall user experience.

DATA SIZE Reduction

The data size for Tally.ERP 9 has been effectively reduced to 40%. This will help in enhancing the overall performance of the application.

Note: Data rewrite is mandatory in this release.

Performance

Fringe Benefits Tax

The following enhancements are made in the Fringe Benefits Tax feature of Tally.ERP 9:

TDL Enhancements for Tally.ERP 9

In Tally.ERP 9, major changes have been provided by the platform to enhance the TDL capabilities which helps the programmer to develop and deploy quick and efficient solutions with ease. Major improvements have taken place in terms of language usage standardisation and performance improvements.

Breakthrough enhancements at the Collection level to provide capabilities of Remoting and Advanced Reporting. Collection is now a complete Data Processing Artefact in TDL.

Let us now have an overview of the major enhancements that have taken place in the areas mentioned below. A detailed documentation for each of these enhancements is available in our document “TDL Enhancements for Tally.ERP 9”. This document along with corresponding Sample TDL’s can be downloaded from our website.

For detailed documentation refer to TDL Enhancements for Tally.ERP 9 on Tally Website.

Attributes and Modifier Enhancements

Based on user requirements and analysis many new attributes have been introduced. These have impacted the programmer in a way that has reduced their deployment time to cater to functional requirements. Some of the new usage have improved the performance drastically.

The behaviour and syntax of many attributes and modifiers have been changed to maintain consistency and ease of code. The sequence of evaluation of attributes and modifiers have been standardised.

Mentioned below is the complete set of new Attributes and Modifiers

Mentioned below is the list of existing attributes and modifiers for which the behaviour has been changed

Enhanced Special Symbols

New special symbols have been introduced to take care of Multiline commenting (/*    */), reinitializing definitions (*). The existing system formulas can now be modified for optimized performance using the extended behaviour of ‘#’

New Method Formula Syntax with Relative Object Specification

The $ operator has been enhanced with a new capabilities. This allows direct access to any object method including its sub-collections to any level with a dotted notation framework. Using the new capability, there is no need to repeat a line over a sub-collection to access it. The values from any object anywhere can be accessed without making the object as the current object in context.

Enhancements-Object Association & Object Access via Interface Object

In TDL, Interface Object exists in context of any data object. Every Interface object needs to be associated with some data object. In the absence of any explicit object association, Interface object will get associated with Anonymous object. TDL programmer can explicitly associate Interface objects like Report, Part, Line and Field with data object. There have been changes either in the form of syntax improvements or with the introduction of new attributes like “Object Ex” at the part level.

From this release onwards, data objects in associated with Interface objects can be accessed using the new Interface object access syntax. Now it is possible to identify an Interface object using Access Name and then use the enhanced method formula syntax to access the Data Object associated with it.

Data object which is associated to Interface Object can be accessed with the following 2 step procedure.

Bracket Support in Language Syntax

Prior to this release, the usage of TDL language token bracket (‘(’ and ‘)’) was restricted as mathematical operator only. From this release onwards brackets can be used in the following scenarios.

Action Enhancements

Key action is enhanced to perform various operations on multiple lines. Multiline selection capability is possible with the help of two attributes Scope (Key definition) and Selectable (Part and Line definition).

Some New and Changed Actions are mentioned below

New Actions

Enhanced Actions

User Defined Functions in TDL

This is one of the breakthrough changes which has taken place at the platform level. We all know that TDL is a definition language which provides capability for rapid development. But now TDL is procedural as well. With the introduction of Functions/Procedures as a part of Tally.ERP 9 family the TDL capabilities have reached a new dimension.

This will help the application programmers to develop their own functions for achieving business functionality. Their will be a decrease in platform dependency for particular business function. The resultant would be faster development cycles for business modules.

For detailed documentation, refer to User Defined Functions for Tally.ERP 9 on Tally Website.

Collection Enhancements

Collection, the data processing artefact of TDL provides extensive capabilities to gather data not only from Tally database but also from external sources using ODBC, DLLs, and HTTP and so on. A set of new capabilities have been added to Collection which provides far more flexibility and power in the hands of the TDL programmer. This will allow writing significantly complex reports with ease and still delivering enhanced performance with high volume of data.

The following are the capabilities which have been achieved using new collection enhancements.

Aggregation & Summarization

A major technological advancement in this release of Tally.ERP 9 is “Data Roll up in TDL Collection – GROUP BY”. This will now facilitate the creation of large summary tables of aggregations in a single shot using the new attributes of the Collection description. This allows us to Walk down the object hierarchies and gathers values and summarizes them in one scan. Overall it reduces the TDL code complexity, resource requirement and increases performance drastically in case of reports generated using this new capability.

Collection re-use, extraction and chaining

A collection can extract information from other collections including its sub-objects with the choice of method(s), filter(s) and sort-order. Source Collection within a collection, collection(s) can be chained. In other words, Summary Collection can be used as Source Collection for some other Collection and so on.

Indexed or Searchable Collection on TDL defined keys

The capabilities discussed above extend the data gathering capabilities of TDL. However business reporting in general and in Tally uses hierarchical presentation or columnar presentation rather than simple table representation. If Report is having two or more dimensions like Ledger and Cost Centre and so on, a simple repeat on the summarized collection will not suffice. In order to improve performance indexing capability has been introduced which will work with a key combination.

Usage as Tables

TDL allows to display the values obtained from the collection as a pop-up table. Earlier the values of voucher and the ODBC data can’t be displayed as a collection. Now all limitations pertaining to usage of Collections as Tables have been completely eliminated. Any collection which can be created in TDL can be displayed as a table now. Collection with aggregation and XML Collections can also be used as Tables.

 Integration Capabilities using HTTP XML Collection

Collection capability has been enhanced to gather live data from HTTP/web-service delivering XML. The entire XML is automatically now converted to TDL objects and is available natively in TDL reports as $ based methods. Reports can be shown live from an HTTP server. The attributes in collection for gathering XML based data from a remote server over HTTP are RemoteURL, RemoteRequest, XMLObjectPath, and XMLObject.

Dynamic Object support for HTTP-XML Information Interchange

When a collection is used for editing (alter/create), objects are dynamically added to the collection when a new line is repeated over the same. The type of object which is added depends on the specification in the TYPE attribute. In case the TYPE attribute is not specified it defaults to adding a standard empty object.

However the following holds true for a COLLECTION keeping in mind the latest enhancements

Depending solely on the TYPE attribute for deciding the object type is a constraint with respect to the above facts. This is now being removed with the introduction of a new attribute which will independently govern the type of object to be added to the collection on-the-fly. A new attribute NEW OBJECT is now supported for collection

Collection Capabilities for Remoting

Enabling access to your organizational data in an ‘any-time, any-where’ and yet being truly usable is what Tally.ERP 9 delivers. With Tally.NET enabled remote access, it will be possible for any authorized user to access Tally.ERP 9 from anywhere.

Major Enhancements have taken place at the collection level to achieve remoting capabilities. The attributes Fetch, Compute and AggrCompute provided at the collection level and FetchObject and FetchCollection at the report level significantly help in above functionality.

For detailed documentation, refer to Writing Remote Compliant TDL for Tally.ERP 9 on Tally Website.

Minor Enhancements

Accounting Masters

Accounting Reports

Accounting Vouchers

Company Master

This feature will help to ensure that the unauthorised users does not open and view/alter/delete the Company data from Educational version of Tally.ERP 9. The users will be restricted to open the data without the Account TDL’s being loaded (which may have certain restrictions) in Educational Mode.

Cost Categories/Cost Centres

CST

E-mail

Excise for Dealers

Fringe Benefits Tax

Final Accounts

Installation

Inventory Masters

Inventory Vouchers

Job Costing

Licensing

Multi-currency

Payroll & Statutory

POS

Printing

Reports

Security Control

Service Tax

VAT

Issues Resolved

Accounting Masters

This issue has been resolved.

Accounting Reports

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This Issue has been resolved.

This issue has been resolved. The credit note entry made both in voucher and invoice mode, when printed from Multi Voucher Printing option is displaying the Party name.

This issue has been resolved.

This issue is resolved and it does not allow to drill down.

This issue has been resolved and only Debit Bill are displayed when Show Bills of following type is set to Debit Bills in F12: Configure.

Accounting Vouchers

This issue has been resolved and the VAT Percentage and amount are now being calculated on the basis of the re-selected VAT ledger.

This issue has been resolved. The calculation of excise duty on an item is now being displayed only for the relevant excise ledger.

This issue has been resolved. The Description of Ledger screen is now being displayed even for Accounts only companies.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been Resolved and now the excise amount is calculated correctly.

This issue has been resolved and the values entered in the above mentioned fields are being retained with the flexibility to save the changes made to the invoice.

This issue has been resolved and the VAT/TAX class is now displayed for any number of items added to the sales invoice in the alteration mode.

This issue has been fixed.

Audit Features

This issue has been resolved.

Budgets and Credit limits

This issue has been resolved and the Budget variance button has been removed from the Sales Register, Purchase Register, Journal Register under Accounts Books, Bill Outstanding Reports of Sundry Debtors and Creditors, Stock Items, Stock Transfers, Physical Stock Register under Inventory Books and Memorandum Vouchers under Exception Reports, as it is not required.

Cost Categories

This issue has been resolved.

Crash/MAV

This issue has been resolved.

This issue has been resolved.

Data/TCP Migration

This issue has been resolved and the order reference number entered in every sales invoice is now being retained even after migrating data from Tally 7.2 to Tally.ERP 9.

Excise for Dealers

This issue has been resolved.

This Issue has been resolved and the address of the party is now being displayed for all entries in the detailed format of Excise Stock Register and Purchase Bill Register.

This issues have been Resolved

Export/Import

This issue has been resolved and the part numbers of the stock items are now being displayed correctly in the Excel sheet.

This issue has been resolved.

This issue has been resolved and vouchers can now be imported even when the effective date is not mentioned in the voucher.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved and compound units can now be exported to excel as text and not as a number.

Final Accounts

This issue has been resolved and the column heading separator lines appear in the Profit and Loss Account.

Fringe Benefit Tax

This issue has been resolved.

This issue has been resolved.

This issue has now been resolved.

This issue has been resolved and now the Additional Education Cess @ 1% is not considered in the FBT Computation report of the previous year.

This issue has been resolved and the FBT Computation report now displays the details like any other report regardless of data size.

This issue has been resolved.

This issue has been resolved.

This issue has now been resolved.

This issue has been resolved. The value displayed in FBT Computation report is captured in FBT Payment voucher on using the auto fill option and the Company FBT Assessee Details are also retained even after restoring the data.

This issue has been resolved.

This issue has been resolved.

Inventory Masters

This issue has been resolved, and the Components/items can now be deleted without reloading the application or renaming the item.

This issues has been resolved and Allow use of expired batches is now displayed when Use expiry dates is changed.

This issue has been resolved

Inventory Vouchers

This issue has been resolved.

This issue has been resolved. Multiple delivery note numbers are now being printed in a single sales invoice.

This issue has been resolved. On selecting Any as godown, the warning message Negative Stock! is not displayed if there is closing balance of stock items in other godowns.

This issue has been resolved.

This issue has been resolved and Rate is calculated based on the Quantity and amount specified.

This issue has been resolved.

This issue has been resolved and the Delivery Note date is printed in the sales invoice.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved and the warning message displays the correct negative stock value.

 This issue has been resolved and the List of Items is not displayed in the above Vouche types when the option Use Common table for stock items is enabled.

This issue has been resolved.

Inventory Reports

This issue has been fixed.

Job Costing

This issue has been resolved.

Licensing

This issue has been resolved.

Multi-currency

This issue has been resolved and on altering a voucher containing foreign currency, opening and closing balances appear in foreign currency only.

This issue is resolved and now it displays the correct reconciled values.

This has been resolved and it now displays the opening and closing balance in foreign currency.

ODBC/Export/Import

This issue has been resolved. The Purchase Invoice is now being exported in HTML format along with the Company’s address & Email-ID.

This issue has been resolved.

This issue has been resolved.

Optional & Scenario management

This issue has been resolved.

Payroll & Statutory

This issue has been resolved and the option to drill down from Expat Reports has been removed.

This issue has been resolved

This issue has been resolved

This issue has now been resolved.

This issue has been resolved.

This Issue has been resolved and now only the payslips with the entries are printed, when the option Remove Zero Entries is enabled in Multi Payslip Printing.

This issue has been resolved.

This issue has been resolved.

The alignment has now been rectified.

POS

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue is resolved and amount name does not get repeated.

Printing

This issue has been resolved.

This issue has been resolved and the report titles now display the names of the respective vouchers selected in the Printing Vouchers screen.

This issue has been resolved.

This issue has been resolved and now “Invoice” is set as Default Title, when the title is not defined in the Voucher Type or in the F12: Invoice Printing Configuration.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

Rewrite/Backup/Restore/Split

This issue is now resolved and on successfully taking backup on the removable drive, the Tally backup file gets added to the device.

Service Tax

This issue has been resolved.

This issue has been resolved and the Service Tax Amount is captured in the bill-wise details screen.

Synchronization

 This issue has been resolved.

Tax Collected at Source

This issue has been resolved.

This issue has been resolved.

This issue has been resolved.

TDL issues

This issue has been resolved and Support for using Rate type in batch-wise details in Creation mode has now been provided.

VAT

This issue has been resolved and now the output VAT amount is being calculated on the
assessable value
of respective sales ledgers.

This issue has been resolved and the Output VAT values are being displayed correctly.

 

green_left.gifgreen_right.gif